Moeller Marine AWB2700-1428GB User Manual download pdf (Page 10)

Hardware and Engineering

12/01 AWB2700-1428GB

Fitting XI/ON base modules

The XI/ON base modules are fitted on the right of the XC600

controller on the mounting rail:

X Fit the groove of the XI/ON base module onto the mounting rail

from underneath .

X Tilt the upper end back and press the base module against the

mounting rail until you can hear it snap into position

X Push the base module as far left as possible until the two snap

hooks on the side of the adapter or neighbouring base module

click into position .

X Fix the XI/ON modules using the end bracket and end plate on

the mounting rail.

X Once you have fitted all modules, switch on the 24 V power

supply on the XC-POW50-XION-UPS module in order to provide

the 5 V supply to the XI/ON modules.

X Check that the modules are working correctly (no fitting errors,

no gaps).

Engineering

Control cabinet design

The arrangement of components in the control cabinet is an impor-

tant factor in ensuring that system and machine functions are free

of interference. During the planning and design stages, as well as

during implementation, it must be ensured that the power and

control sections are separated. The power section includes the

following components:

• Contactors

• Coupling modules

• Transformers

• Frequency inverters

• Current converters

Dividing the control cabinet into to areas with different power and

interference levels is recommended as an effective prevention

against electromagnetic interference. In small control cabinets,

this can often be provided sufficiently by using separators in order

to reduce interference.

Further information on mounting and wiring is provided in

the XI/ON manuals, e.g. ”Hardware and Engineering” –

XI/ON PROFIBUS-DP (AWB2700-1394).

Figure 6: Fitting XI/ON modules

Wire the base modules after they have been fitted and

before you have fitted the electronic modules!

Only apply the field voltage on the XC600 controller base

module after the error-free state of the station is ensured.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 53 54

Comments to this Manuals

No comments

Moeller Marine AWB2700-1428GB User Manual Page 10

Comments to this Manuals