Moeller Marine AWB2700-1428GB User Manual download pdf (Page 13)

12/01 AWB2700-1428GB

XC-ADP/XC-ADP-XION base

modules

These functions were implemented by adapting the UPS device

supplied by Konzept to the power supply modules of the XC600.

When using a different UPS device, the wiring must be adapted

accordingly.

XC-ADP/XC-ADP-XION base modules

General

A base module and a power supply module form one unit. The

following table shows the combination possibilities of both

modules. The modules only differ in their capability for expansion

with XI/ON modules.

A base module provides the platform for the other function

modules that are fitted on. The complete unit is then fitted on the

mounting rail.

Task of the XC-ADP-XION module

The module controls the XI/ON data bus and provides the power

supply (5 V) to the XI/ON modules. The base module has a sepa-

rate connection for the 24 V DC field power supply of the XI/ON

modules. It also has a C connection to which the potential for the

C rails of the XI/ON modules can be connected.

How to expand the controller with XI/ON modules is described in

the XI/ON manuals, ”Hardware and Engineering”, e.g.

AWB2700-1394.

Task of the XC-ADP module

This is used as a platform for other modules.

Engineering the XC-ADP-XION base module

Power supply for the XI/ON modules

The 24 V DC power supply required for the load supply of the XI/

ON modules is connected to the base module (a also ”Power

supply module”). The maximum current consumption is 10 A.

Connections

The C1 connection is routed to the XI/ON modules. It is used for

providing an additional common potential, e.g. PE.

XI/ON modules that have a C in their designation, e.g. S4T S-B-C-

S, require the provision of a common C rail.

Figure 10: Delayed switching of the power supply

a UPS device

Base module Power supply module Expansion

XC-ADP XC-POW50-UPS XI/ON

XC-ADP-XION XC-POW50-XION-UPS –

K1T

XC600

Figure 11: Connections between the XC-ADP-XION base module

and the XI/ON modules

a 5 V DC from the power supply module

b Data from the supply module

c Field supply 24 V DC

d C rail connection

Figure 12: 24 V DC and C1 connections of the XC-ADP-XION

a 24 V DC connection

b C rail connection

c Plug-in terminals, connection cross-sections:

– flexible with ferrule 0.5 mm

to 2.5 mm

– solid 0.5 mm

to 2.5 mm

Warning!

The maximum load on the C rail and C1 connection is

24 V!

XI/ON modulesXC-ADP-XION

Field

Supply

24V 0V

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Comments to this Manuals

No comments

Moeller Marine AWB2700-1428GB User Manual Page 13

Comments to this Manuals