Moeller Marine AWB2700-1428GB User Manual download pdf (Page 30)

Creating an Example Project

12/01 AWB2700-1428GB

PROFIBUS-DP expansion

Proceed as follows to expand the configuration with remote I/Os

via PROFIBUS-DP:

Adding a PROFIBUS-DP module to the XC600 controller

X Ensure that the default address CE000 is set on the

modulea Page 13.

X Select Configuration_XC600 in the PLC Configuration window.

Right-click the mouse and choose Append Subelement r

XC-NET-DP-M....

This will open a window with four tabs for setting parameters

(a Figure 51).

X Only change the baud rate in the Bus Parameters tab from

9,600 kBits/s to 1500 or 12000kBit/s.

All other parameters can be left.

Adding a remote XI/ON gateway

X Select the element XC-NET-DP-M and right-click the mouse.

Choose Append Subelement r XN-GW-PBDP-12MB....

The following window with default parameters will appear:

X Select the Input/Output tab to configure the inputs and outputs.

X Select the required input/output modules from the left-hand

column and transfer them to the right column using the Select

button.

The order of the modules in the right-hand column must match the

configuration of the controller.

The bus refreshing module is listed in the Empty Modules group.

Figure 50: Expanding the remote configuration

Figure 51: Changing bus parameters

Figure 52: Adding a XI/ON gateway

Figure 53: Display of PROFIBUS-DP parameters

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 53 54

No comments

Moeller Marine AWB2700-1428GB User Manual Page 30