Moeller Marine AWB2700-1428GB User Manual download pdf (Page 40)

Functions of the Operator

Module

12/01 AWB2700-1428GB

This change will show that the function has been completed.

Handling several programs

Several bootable programs can be loaded and stored on the hard

disk of the XC600. The last program loaded is activated by the

system. A program that is already activated will be deactivated.

Every time the XC600 is switched on and the LOAD or REBOOT

menu items are called, the PLC generates an executable program

from the activated program and stores it in the working memory.

This will overwrite any executable program that is present.

The program in the working memory can then be started.

A program can be changed by activating the required program:

X Use the MSS to choose MAIN MENU r PROGRAM r

INTERNAL r ACTIVATE.

The name of the loaded and executable program is displayed. It is

marked by a large period character.

X Turn the MSS to the right.

The names of other programs will appear in turn.

X Select a name (cursor flashes at the side of the name).

X Press the MSS. Turn the MSS so that the text ENTER appears

instead of menu item BACK.

X Press the MSS.

This will display the next higher menu.

X Carry out a restart with the OMS set to RUN-P or RUN, or

choose LOAD or switch the XC600 off and on again.

The new program is started.

Deleting programs

Programs are basically deleted in the same way as previously

described.

Both the activated bootable program as well as another bootable

program can be deleted.

Copying programs

Copying is possible between the hard disk and the CompactFlash

card:

If you wish to copy from the hard disk:

X Use the MSS to choose MAIN MENU r PROGRAM r

INTERNAL r COPY.

If you wish to copy from the CompactFlash card:

X Use the MSS to choose MAIN MENU r PROGRAM r

EXTERNAL r COPY.

The name of the loaded and executable program is displayed. It is

marked by a large period character.

X Turn the MSS to the right.

The names of other programs will appear in turn.

X Select a name (cursor flashes at the side of the name).

X Press the MSS. Turn the MSS so that the text ENTER appears

instead of menu item BACK. Press the MSS.

The next higher menu is displayed and the copy operation is

completed.

Editing programs on the CompactFlash card (CFC)

Proceed as follows to save programs on the CFC:

X First load programs onto the hard disk with XSoft.

X Then copy the programs via the XC600 menu to the CFC.

The original program will be kept on the hard disk.

Both programs can be deleted independently of each other.

The programs on the CompactFlash card and on the hard disk are

treated in the same way. The CompactFlash card can be accessed

via MAIN MENU r PROGRAM r EXTERNAL r ---.

Copy and delete operations are carried out in the same way as on

the hard disk.

A bootable program can also be activated on the CompactFlash

card. A previously activated program will be deactivated (this also

applies to programs that are saved on the hard disk). Every time

the XC600 is switched on and the LOAD or REBOOT menu items

are called, the PLC generates an executable program from the acti-

vated program and stores it in the working memory.

This will overwrite any executable program that is present.

When you delete the program on the CompactFlash card, the

executable program is retained until the next reboot, load or

startup operation.

Only one single executable program can be activated at a

time!

17:22:37 #

STOP

PRONAM.PRO

>MAIN MENU

Only bootable programs can be copied!

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Comments to this Manuals

No comments

Moeller Marine AWB2700-1428GB User Manual Page 40

Comments to this Manuals