Moeller Marine AWB2700-1428GB User Manual download pdf (Page 48)

Menu Overview of the Oper-

ator Module

12/01 AWB2700-1428GB

HARDWARE

CONFIGURE: After the CONFIGURE menu is called, the display

shows the current module configuration of the XC600.

AUTOCONFIG:

The functionAUTOCONFIG is always activated. In this state the

system will scan the module configuration on startup. If the config-

uration does not change, for example, after commissioning has

been completed, the configuration can be ”frozen” for diagnostic

tasks.

For this disable the AUTOCONFIG function:

X Choose MAIN MENU r DEVICE r HARDWARE r

AUTOCONFIG.

The cursor will be positioned on ON:

X Turn the MSS until the display shows OFF.

X Press the MSS. The word ENTER will appear on the display.

X Press the MSS to return to the menu.

This function can be re-activated at any time.

The next time that the PLC is started up the PLC will detect if any

modules are missing or faulty. This is indicated by the SF LED lit.

The following error text will appear in the DIAGNOSTICS r ERROR

menu:

The number 1 in the designation XC-NET-1 indicates the module

(address):

MAIN MENU: SYSTEM

This menu is used to shut down the operating system or reboot it.

Turn the MSS to select either SHUTDOWN or REBOOT.

HARDWARE:

CONFIGURE

AUTOCONFIG

BACK

XC-CPU601-4

XC-POW50-XU

XC-NET-DP-M

XC-SYS1

BACK

AUTOCONFIG:

BACK

Number (Hardware) address of the module

0 CE000

CC000

D4000

05.12_15:32

XC-NET-1

NOT DETECTED

BACK

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54

Comments to this Manuals

No comments

Moeller Marine AWB2700-1428GB User Manual Page 48

Comments to this Manuals